Heat Recovery Ventilation

Why throw out old energy when you can recycle it instead?

A heat recovery ventilation unit is basically an energy recycling system. It collects energy from the warm inside air as it leaves your home via the ventilation system, and re-uses it to heat up fresh incoming air.
If you’re building a new house or developing new apartments, now’s the perfect time to take advantage of NIBE’s energy efficient heating technology. Install a heat recovery ventilation unit and you can enjoy a healthy, oxygen-rich atmosphere inside your home, at the same time as reducing your electricity consumption.

Heat recovery ventilation unit

  • NIBE GV-HR110-250 is normally used in homes with an area up to 180 m²
  • NIBE GV-HR110-400 is normally used in homes with an area up to 380 m²
  • Counter flow heat exchanger with a temperature efficiency of up to 96%
  • Fans with energy saving EC motors
  • Complete control system with user friendly control panel

NIBE GV-HR110 -250 and -400 is a heat recovery ventilation unit equipped with a counter flow heat exchanger with a temperature efficiency of up to 96%. The ventilation unit is equipped with supply and extract fans with energy saving EC motors and forward curved fan blades.

NIBE GV-HR110 is delivered with the following:

  • Counter current heat exchanger
  • Energy saving fans with forward curved fan blades
  • EC motors
  • F7 filter on supply air side and G4 filter on exhaust air side
  • Complete control system with user friendly control panel

NIBE GV-HR110 can be delivered with the following options:

  • Electrical pre-heater (recommended)

Suitability

NIBE GV-HR110 is suitable for domestic ventilation systems, where high temperature efficiency and low energy consumption are requested. This means that new demands for low energy consumption can be met.

NIBE GV-HR110-250 is normally used in homes with an area up to 180 m² (at an average room height at 2.4 m and an air exchange rate of 0.3 1/h).

NIBE GV-HR110-400 is normally used in homes with an area up to 380 m², with an air exchange rate of 0.3 1/h and an externally loss of pressure of 150 Pa.

Automatics

NIBE GV-HR110-400 is delivered with factory setting which means that the unit can be started without setting up the menu. The factory settings are standard settings that can be changed to specific needs and demands of your living area.